- Cuts Smoothly and Accurately, Milled Edges are Finished With No Sanding Needed
- Start the Cut Where You Want and Cut With Ease
- Cuts Mild Steel, 16 Gauge Aluminum, Fiberglass, Plastic, and Plastic Laminates
Cuts Smoothly and Accurately, Milled Edges are Finished With No Sanding Needed Start the Cut Where You Want and Cut With Ease Cuts Mild Steel, 16 Gauge Aluminum, Fiberglass, Plastic, and Plastic Laminates Get straight, smooth and accurate cuts every
: $ 0.00
: $ 1,173.93
- 8" XTREME FOLDING SAW YELLOW
Made in Canada with non-breakable polypropylene handle & santopreme grip. The coated high carbon steel blade provides the required give to prevent unnecessary breakage. Breaks down to 1" x 8" to easily carry in a pack. Weight: 6.7 oz.
: $ 20.12
: $ 30.00
- Heavy Duty Industrial Quality
- Clean smooth cuts
- C3 Carbide
- Thin Kerf
- 0 degree hook
Especially designed to cut wood mouldings on Makita, Ryobi, Craftsman, Dewalt & Hitachi miter saws. Alternate top bevel grind with a raker. Negative tooth design provides the least possible grabbing of materials. 12" diameter with a 1" bore and 80 te
: $ 94.99
- 12V battery for Makita tool/1500mAh.
- All batteries are tested for maximum performance and reliability.
- 12-Month limited warranty.
- Batteries use only the highest quality cells.
- Superior performance at a fraction of OEM prices
Compatible with the following tool
1050D 1050DA 1050DRA 1050DWA 1050DWD 4013D 4191D 4191DWA 4191DZ 4331D 4331DWAE
: $ 29.50
- Corsscuts both soft/hardwoods and plywood.
- 10-Inch x 60 Teeth Alternate Top Bevel grind, 15 Degree Hook, 5/8 Bore
- Laser cut expansion slots allowing the blade to expand and contract from heat preventing warpage
- Thin Kerf reduce waste in material and require less horsepower.
- Industrial Quality. Made in Germany.
Soft & Hardwoods Cutting Cut-Off and Crosscut Saw Blades
: $ 76.45
: $ 56.34
- When used with Festool guide rails (75 inch rail included), you can achieve perfectly straight and splinter-free cuts.
- Spring-loaded riving knife (splitter) keeps the cut kerf open so that the material does not pinch the blade. This reduces the chance of kickback.
- The slip clutch helps to minimize the risk of a kickback and minimizes wear on the blade, gear case, and motor.
- Blade changes are easier and safer using the FastFix system which locks switch and arbor simultaneously for easy arbor bolt removal.
- MMC electronics provide soft start, variable speed, constant speed under load, and current and thermal overlad protection.
Cut as straight as a panel saw with the versatility of a portable saw. The Festool TS 75 EQ plunge saw has a multitude of uses, from fine carpentry to cutting spiral staircase steps; from rough timber to cutting out window frames in renovation work.
: $ 655.00
: $ 725.00
- black and decker gco18sfb black & decker gco18sfb 18-volt cordless drill & stud sensor kit
VARIABLE SPEED/REVERSE PROVIDES CONTROLLED DRILLING & DRIVING IN A VARIETY OF MATERIALS; 24-POSITION CLUTCH PREVENTS SCREWS FROM STRIPPING; KEYLESS CHUCK; SLIDE PACK BATTERY PROVIDES EASY INSTALLATION & REMOVAL OF THE BATTERY;
: $ 135.78
: $ 63.88
- Precision machined jaws for maximum gripping power.Induction hardened and precision sharpened cutting edges.Length: 8".
Lineman pliers have ergonomic non-slip molded grips for user comfort and control. Made of premium quality drop forged and hardened chrome vanadium steel for long lasting durability.
: $ 24.97
- Engine with X torque produces 75 % less emissions, 20 % lower fuel consumption and more power
- Dust sealed starter unit with a sealed return spring and pulley bearing
- 50% easier starting by reducing the compression in the cylinder during starting
- Wet cutting kit
- Fuel indicator in the tank shows fuel level, to help avoid unnecessary downtime
966477201 Blade Capacity: 16" Features: -Husqvarna K960 Gas Cut Off Saw.-Cuts curbstones and pavers in landscaping.-Available in 14'', 16'' Blade Capacity.-Pipe cutting in installation work.-Asphalt cutting in roadwork and pre-cutting in pipe trenche
: $ 1,429.00
: $ 1,325.00
- 6-Inch x 3/4-Inch x .035-Inch - 24 TPI
- 8-Percent Cobalt Bi-Metal Matrix II High Speed Steel Cutting Edge
- Tooth Hardness RC 65-66
- 5 Pack
- Made in USA
Bully Hog Reciprocating Saw Blades from Stone Tools are Bi-Metal blades made with 8-Percent Cobalt. The Matrix II high speed steel cutting edge has a tooth hardness of RC 65-66 providing shatter and shock resistant teeth, resistance to heat and wear
: $ 13.14
: $ 11.34